LK Automation Limited
Compression joint PT 3/8 D=8 OMRON PT 3/8 D=8
Brand:
OMRON
Name: Compression joint
Model: PT 3/8 D=8
A screw specification (JIS): R3/8.
For the protection of pipe diameter: diameter of 8mm.
Size: B, 5; C, 19; D, 15.
Plain diameter: C, 21; B, 17.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
...More relevant models >>>>
Name: Compression joint
Model: PT 3/8 D=8
A screw specification (JIS): R3/8.
For the protection of pipe diameter: diameter of 8mm.
Size: B, 5; C, 19; D, 15.
Plain diameter: C, 21; B, 17.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
Size: 1/16 DIN.
Case color: Black.
Power supply voltage: 24 VAC/VDC.
Input type: Thermocouple or resistance thermometer.
Auxiliary outputs: 1.
Control output 1: Current output.
New 48 x 48-mm Basic Temperature.
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function OMRON PT 3/8 D=8.
Indication Accuracy.
Thermocouple input: ±0 PT 3/8 D=83% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
New E5CN-U Models (Plug-in Models) with analog inputs and,
current outputs.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV OMRON PT 3/8 D=8.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter. Control output 1: Voltage output.
Auxiliary output: Two.
Communications: RS-485.
Heater burnout: One.
Event inputs: --.
Power supply voltage: 100 to 240 VAC.
Large White PV Display That’s Easier to Read OMRON PT 3/8 D=8.
Easy to Use, from Model Selection to,
Setup and Operation.
A Complete Range of I/O Capacities,
Functions, and Performance.
Handles More Applications.
The white PV display with a height of 15.2 mm improves visibility PT 3/8 D=8 OMRON.
High-speed sampling at 50 ms.
Short body with depth of only 60 mm.
Easy connections to a PLC with programless communications.
Use component communications to link Temperature PT 3/8 D=8 OMRON.
Controllers to each other. Temperature can be measured without contact with the workpiece.
Achieve no damage, health and efficient temperature management.
A small spot diameter 3mm and 8mm diameter two types.
Reproduction of positive and negative 0.5 degrees Celsius, response speed of 0 PT 3/8 D=8 OMRON. 4 seconds,
(95%) with high precision and high speed measurement.
In addition to the origiinal middle temperature (0 ~ +500 C),
Also added in low temperature (- 50 DEG C ~ +500),
High temperature (0 ~ +1000 degrees C) models PT 3/8 D=8.
New measurement distance up to 500mm, 1000mm long distance type.
Use another programmer, can chaange the temperature monitoring, radiation rate,
Moving average function and output range OMRON PT 3/8 D=8.
(picture for the installation of programmer in the ES1 body)
Case color: Black.
Power supply voltage: 24 VAC/VDC.
Input type: Thermocouple or resistance thermometer.
Auxiliary outputs: 1.
Control output 1: Current output.
New 48 x 48-mm Basic Temperature.
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function OMRON PT 3/8 D=8.
Indication Accuracy.
Thermocouple input: ±0 PT 3/8 D=83% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
New E5CN-U Models (Plug-in Models) with analog inputs and,
current outputs.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV OMRON PT 3/8 D=8.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter. Control output 1: Voltage output.
Auxiliary output: Two.
Communications: RS-485.
Heater burnout: One.
Event inputs: --.
Power supply voltage: 100 to 240 VAC.
Large White PV Display That’s Easier to Read OMRON PT 3/8 D=8.
Easy to Use, from Model Selection to,
Setup and Operation.
A Complete Range of I/O Capacities,
Functions, and Performance.
Handles More Applications.
The white PV display with a height of 15.2 mm improves visibility PT 3/8 D=8 OMRON.
High-speed sampling at 50 ms.
Short body with depth of only 60 mm.
Easy connections to a PLC with programless communications.
Use component communications to link Temperature PT 3/8 D=8 OMRON.
Controllers to each other. Temperature can be measured without contact with the workpiece.
Achieve no damage, health and efficient temperature management.
A small spot diameter 3mm and 8mm diameter two types.
Reproduction of positive and negative 0.5 degrees Celsius, response speed of 0 PT 3/8 D=8 OMRON. 4 seconds,
(95%) with high precision and high speed measurement.
In addition to the origiinal middle temperature (0 ~ +500 C),
Also added in low temperature (- 50 DEG C ~ +500),
High temperature (0 ~ +1000 degrees C) models PT 3/8 D=8.
New measurement distance up to 500mm, 1000mm long distance type.
Use another programmer, can chaange the temperature monitoring, radiation rate,
Moving average function and output range OMRON PT 3/8 D=8.
(picture for the installation of programmer in the ES1 body)
...More relevant models >>>>
Related download