Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface7.0/7.5 inch screen protective cover (1 pieces)LT seal on the control panel.12.1 inches, replace the backlight (1 / set)Touch screen anti ultraviolet protective film (1 pieces).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA5-DCCNL-01 Proface CA5-DCCNL-01 Connector for connecting DC power cord CA5-DCCNL-01 Proface. (linear, 5 / set)5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).1-0 DVI standard (DVI-D 24 pin convex connector)USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.12 way 4 digital signals into analog signals and output resultsUsed to install the GP3000H series to a commercially available support arm or panel CA5-DCCNL-01 Proface. The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.12.1 inches, replaced by a host of backlight (1).Fitting on NETTWORK FLEX interface CA5-DCCNL-01. Connecting NETWORK FLEX communication cable. (5 / set)Used to prevent disconnection of the connection (1 interface, 5 / set).A1/A2/B+ DIO Type connector (compression type) (5 / set)Portable GP2000H series models acccessories, RS-422 cable with D-Sub connector (10 meters) CA5-DCCNL-01. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2