Portable GP2000H series models accessories, RS-232 single head cable (3 m).With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Touch screen anti ultraviolet protective film (1 pieces) Proface CA3-MPI-PGN-PFE CA3-MPI-PGN-PFE Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputStandard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. Used in a variety of host and man-machine interface for RS-422 connectionThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface CA3-MPI-PGN-PFE. A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 single head cable (10 m).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).3 / setsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface CA3-MPI-PGN-PFE. For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Adapter for EX module (5 / set)Used to install the human machine interface to the fixed panel (2 / cover) CA3-MPI-PGN-PFE Proface. For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-MPI-PGN-PFE Proface. (1)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA3-MPI-PGN-PFE Proface CA3-MPI-PGN-PFE. When the man-machine interface is installed to the fixed panel for providing dust proof aand moisture proof function (1 pieces) Proface CA3-MPI-PGN-PFE. COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)