Use external output for the GP3000 series of auxiliary connectors (5 / sets).7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeConnector for connecting DC power cord. (right angle, 5 / set)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT Proface CA3-DFS6-01. The main controller is connected to the man-machine interface of the host, for MPI communicationFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA3-DFS6-0110.4 inches (STN), the replacement of the host backlight (2 / set).12.1 inches, replace the backlight (1 / set)Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) Proface CA3-DFS6-01. GP3000H replacement label (5 sheets / set)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.A veneer, for the GP4000 series back loading models of full flush (white, 1)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface CA3-DFS6-01. COM1 interface with the cable for direct connection to the CPU series PLC ATo prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) CA3-DFS6-01 Proface. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-DFS6-01 Proface. (1)COM1 interface with the cable (RS-232C), used to connect directly to the CPPU series PLC FX (not the same time using the programming controller)10 CA3-DFS6-01. 4 inches or larger, when installed to provide the function of dust and moisture2 / setsDirect interface Matsushita Electric PLC FP series CPU port CA3-DFS6-001 Proface Proface CA3-DFS6-01. 3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.The PC adapter for PCMCIA slot read CF card required.