LT4000M (module type DIO), NPN output, DC24V (host).The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Used to install the GP3000H series to a commercially available support arm or panel.Replaceable anti fouling film for protecting screen protective film (5 sheets / cover) Proface CA3-ADPTRM-01. 5 / setsUSB cable clamp for preventing disconnection of connection (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-ADPTRM-01 (1)3.4 Inch Touch Screen anti UV protective film (1 pieces).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface CA3-ADPTRM-01. Suitable for LT4000M/GP4000M series modules, 5.7 inch. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.7.4 inches, replace the backlight (1 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT Proface CA3-ADPTRM-01. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) CA3-ADPTRM-01 Proface. 5.7 inches, replace the backlight (1 / set)AUX connector for external output (5 / set).5.7 inches, installed to provide the function of dust and moistureApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) CA3-ADPTRM-01 Proface. Colorful LED switch with USB interface.Touch screen anti ultraviolet protective film (1 pieces).For 3.8 inch models, preventt cable loose from the USB cable fastening clip (5 / set) CA3-ADPTRM-01. 12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function CA3-ADPTRM-01 Proface. 13 pin input connectors for HTB andd 16 pin output connectors Proface CA3-ADPTRM-01. (1 / set)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)