Product Name:Wall mounted receptacle
Part No.:3028.
Ampere:16A.
Poles:4p.
Voltage:>50-500V.
Earth position:2h.
Hertz300-500 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top, two blind cable entries (can be cut out) at bottom Mennekes 3454.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch 3454Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:418.
Ampere:16 A.
Poles:4 p.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals.
suitable for through wiring Mennekes 3454.
internal fixing.
one cable entry at top and two blind entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.Panel socket with TwinCONTACT dual connection terminal.
Screw free spring terminal.
Resistance to chemical corrosion.
Suitable for T connection.
With 2 external fixation holes.
Housing base can rotate 180 degrees Mennekes 3454.
Socket can be fitted with auxiliary contacts.
Current: 32A.
Pole number: 4p.
Voltage: 230V.
Location: 9h hour.
Hz: 50-60Hz.
Connection: free screw - TwinCONTACT.
Contact: standard.
Protection level: IP67 3454 Mennekes. Product Name:Wall mounted receptacle
Part No.:856.
Ampere:63A.
Poles:3p.
Voltage:110V.
Earth position:4h.
Hertz50-60 Hz.
Connection technology:Screw terminals.
Contact:standard 3454 Mennekes.
Protection type:IP67.
screw terminals.
with SoftCONTACT.
internal fixing.
one cable entry at top and two blind cable entries. (can be cut out) at bottom.
enclosure base can be turned 180°.
with 6 fixing points to accommodate special terminals.
products with pilot contact: part no. + index P 3454 Mennekes. Product Name:Cepex ddouble receptacle, grey
Part No 3454. :4202.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw termminals Mennekes 3454.
cable entry: 1 x M 20 plugged at top, 2 x M 25 to be cut out at the bottom, 2 x M 20 to be cut out at the back side, for cables 7 up to 13 mm Ø.