One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.Data transmission cable between host and LT series. Length: 5 meters.The MITSUBISHI A series PLC is connected to GP, length: 5 m.Extension cable for connecting USB (Type-A) interface to front panel.Fitting on NETWORK FLEX interface Proface PFXZCBOP41. Connecting NETWORK FLEX communication cable. (5 / set)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication PFXZCBOP412GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to prevent disconnection of the connection (1 interface, 5 / set) Proface PFXZCBOP41. Converting 2 analog signals into digital signals10.4 inches (TFT), the replacement of the host backlight (1).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.Cable for connecting GP3000 to various modules10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface PFXZCBOP41. Touch screen anti ultraviolet protective film (1 pieces).Used to display analog RGB (2 channels) on the GP3000Used to convert RGB to DVI-AI/O module, including 32 point NPN/PNP inputScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceSuitable for LT4000M/GP4000M series modules, 3 PFXZCBOP41 Proface PFXZCBOP41 Proface. 5 inch.The man-machine interface directly connected MITSUBISHI eleectric PLC QnA series A/ CPU programming port PFXZCBOP41. 5.7 inches, replace the backlight (1 / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) PFXZCBOP41 Proface. (serial communication terminal adapter is included iin the product package)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface PFXZCBOP41.