LK Automation Limited
1VE-10CA-13 OMRON 1VE-10CA-13
Brand:
OMRON
Name: Small Enclosed Switches
Model: 1VE-10CA-13
Actuator type: Cam arm.
Operating direction: Two-side operation.
Small, Lightweight Enclosed.
Switches.
V-series Switches were placed in diecast cases to provide,
superior dust resistance and mechanical strength.
Cam arms and cam roller arms can be set to any position,
within 360°.
...More relevant models >>>>
Name: Small Enclosed Switches
Model: 1VE-10CA-13
Actuator type: Cam arm.
Operating direction: Two-side operation.
Small, Lightweight Enclosed.
Switches.
V-series Switches were placed in diecast cases to provide,
superior dust resistance and mechanical strength.
Cam arms and cam roller arms can be set to any position,
within 360°.
Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: Incandescent lamp, 28 VDC.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @@. R (Red); Y (Yellow); G (Green); A (Blue); W (White) OMRON 1VE-10CA-13.
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation 1VE-10CA-13
Easy panel mounting from the front and simple lamp replacement.
without tools. Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Operation: Alternate operation (self-holding) OMRON 1VE-10CA-13.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts OMRON 1VE-10CA-13.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Actuator: Adjustable rod lever 25 to 140 mm.
Item: Hermetic seal, Molded terminals, -140 models; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Modular panel direct mounting type, easy to install and maintain the basic type 1VE-10CA-13.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high ttemperature 1VE-10CA-13.
Stable detection can be achieved with high ambient temperature.
Relay unit.
Product Name: 61F-11_ unit * 1.
Purpose: high sensitivity.
Operation: Alternate operation (Self-holding).
Output: DPDT.
Lighting: Incandescent lamp, 28 VDC.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @@. R (Red); Y (Yellow); G (Green); A (Blue); W (White) OMRON 1VE-10CA-13.
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation 1VE-10CA-13
Easy panel mounting from the front and simple lamp replacement.
without tools. Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Operation: Alternate operation (self-holding) OMRON 1VE-10CA-13.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts OMRON 1VE-10CA-13.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Actuator: Adjustable rod lever 25 to 140 mm.
Item: Hermetic seal, Molded terminals, -140 models; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Modular panel direct mounting type, easy to install and maintain the basic type 1VE-10CA-13.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high ttemperature 1VE-10CA-13.
Stable detection can be achieved with high ambient temperature.
Relay unit.
Product Name: 61F-11_ unit * 1.
Purpose: high sensitivity.
...More relevant models >>>>