Terminal (wire connection): Screw terminal.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: DC 12V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel EE-SX912P-C1J-R 0.3M.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals EE-SX912P-C1J-R 0.3M
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability EE-SX912P-C1J-R 0.3M.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires .
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type EE-SX912P-C1J-R 0.3M.
Non polar proximity sensor.
Type: DC three wire / connector type .
Shape: non shield, M30.
Detection range: 18mm.
Output configuration: PNP.
Action mode: NO. Appearance: Knob-type Selector Switch A22W,
LED lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NO + SPST-NC.
Operating voltage: 12 VAC/VDC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 6 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Leever for easily mounting and removing the Switch Unit EE-SX912P-C1J-R 0.3M.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type EE-SX912P-C1J-R 0.3M.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
EE-SX912P-C1J-R 0.3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=EE-SX912P-C1J-R 0.3M&select=5