Optical system: Through-beam.
Measuring width: 1-mm dia.
Sensing distance: 0 to 2000 mm.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1 . 5 mm.
Connecting method (See note 1 EE-1003. ): M8 Connector (3-pin).
Body length: Short.
Output configuration: PNP EE-1003
Operation mode NO.
A new generation in global applications. Isolation method: Relay.
Zero cross function: No.
Operation indicator: Yes.
Applicable output load(See note.): 10 A 100 to 240 VAC.
Rated input voltage: 12 VDC.
Hybridization of a Magnetic Relay and an,
SSR Achieves 10-A Switching for 10 Million,
Operations EE-1003.
UL/CSA certified (-VD models).
Using a triac to open and close the circuit reduces chattering,
and arching, thereby increasing the electrical durability to 10,
million operations.
Relays contacts for power ON and 10-A switching with high,
capacity are provided in a compact body without the need of,
radiators EE-1003. Plus, there is almost no effect on heat generation,
or ambient temperature .
Operation indicators to easily check operation.
Built-in temperature fuse prevents internal burning due to,
triac or relay malfunctions.
Socket-type Relays the same size as the 1-pole and 2-pole,
LY Relays. Type: 1a1b welding terminal.
Shape: rectangle.
Type: General load.
Motor function: alternate action (self retaining).
With lamp: no light.
Operation Department color: white.
20mm long, with 12 round series
High brightness all one side light.
Because it is round, so easy to punch.
Miniaturization, operation feel good. Analog I/O terminal with screw terminal,
block for EtherCAT communicaitons.
The input/output range can be easily,
changed by the setting with the switch.
Detachable screw terminal block,
facilitates tthe maintenance EE-1003.
Moving averrage calculation function .
Settings within the range of 100μs-64ms.
(For input only.)
Disconnection detection function.
(For input only and for usage with,
1-5V or 4-20mA ranges.)
Selectable node address setting methods:
setting with rotary,

swwitch and with tool software EE-1003.
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance.
EE-1003 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=EE-1003&select=5