LK Automation Limited
E53-QN
OMRON E53-QN
Output: DPDT.
Lighting: LED.
Operating voltage: 5 VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry .
Detachable Switch E53-QN.
The same contacts can be used for both standard loads and microloads E53-QN
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. CV500-CN Cable Bus Connecting Cable Used to join two Hard Disk Units CV500-CN116.Name: Basic Unit (temperature control) *1.
Power supply voltage: 24 VDC supplied from the End Unit.
No. of control points: 2 E53-QN.
Control outputs 1 and 2: Voltage output: 2 points (for SSR drive) *2 .
Control outputs 3 and 4: Transistor output: 2 points (sinking).
Auxiliary output: None.
Functions: burnout Heater alarm, 2 *3; Event inputs, 2 .
Communications functions: G3ZA connection port: RS-485,
From End Unit: Port A or port B: RS-485.
Input type: Thermocouple, platinum resistance thermometer,
analog voltage, and analog current selectable for each channel E53-QN.
Terminal: Screw-less clamp.
In-panel Temperature Controller with Flexible,
Modular Design and Wide Integration with Host,
Devices.
The compact modular structure enables construction of temperature,
systems optimally suited to the application.
Connection can be made to a Programmable Controller without any,
programming required, reducing the number of steps required in ladder,
programming design.
One fully universal-input Unit includes a thermocouple, platinum-resistance,
thermometer, and analog input for easy selection and reduced invventory,
requirements E53-QN.
Conneect directly to the G3ZA Multi-channel Power Controller using,
optimum cycle control for high-accuracy regulation with minimal noise .
Autotuning (AT) can be used for independent heating/cooling PID control.
Self-tuning (ST) can be used to calcullatte the PID constants with the step,
response method E53-QN.
Up to 16 Temperature Controllers can be connected to a single DeviceNet,
Communications Unit.
E53-QN Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E53-QN&select=5
Lighting: LED.
Operating voltage: 5 VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry .
Detachable Switch E53-QN.
The same contacts can be used for both standard loads and microloads E53-QN
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. CV500-CN Cable Bus Connecting Cable Used to join two Hard Disk Units CV500-CN116.Name: Basic Unit (temperature control) *1.
Power supply voltage: 24 VDC supplied from the End Unit.
No. of control points: 2 E53-QN.
Control outputs 1 and 2: Voltage output: 2 points (for SSR drive) *2 .
Control outputs 3 and 4: Transistor output: 2 points (sinking).
Auxiliary output: None.
Functions: burnout Heater alarm, 2 *3; Event inputs, 2 .
Communications functions: G3ZA connection port: RS-485,
From End Unit: Port A or port B: RS-485.
Input type: Thermocouple, platinum resistance thermometer,
analog voltage, and analog current selectable for each channel E53-QN.
Terminal: Screw-less clamp.
In-panel Temperature Controller with Flexible,
Modular Design and Wide Integration with Host,
Devices.
The compact modular structure enables construction of temperature,
systems optimally suited to the application.
Connection can be made to a Programmable Controller without any,
programming required, reducing the number of steps required in ladder,
programming design.
One fully universal-input Unit includes a thermocouple, platinum-resistance,
thermometer, and analog input for easy selection and reduced invventory,
requirements E53-QN.
Conneect directly to the G3ZA Multi-channel Power Controller using,
optimum cycle control for high-accuracy regulation with minimal noise .
Autotuning (AT) can be used for independent heating/cooling PID control.
Self-tuning (ST) can be used to calcullatte the PID constants with the step,
response method E53-QN.
Up to 16 Temperature Controllers can be connected to a single DeviceNet,
Communications Unit.
E53-QN Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E53-QN&select=5
...more relevant model market price >>>>
Related products
OMRON
Modular Temperature Controller
EJ1N-TC2B-QNHB
Name: Basic Unit temperature control
OMRON
Modular Temperature Controller for Gradient Temperature Control
EJ1G-TC2A-QNH
Name: Basic Unit gradient temperature co
OMRON
Modular Temperature Controller for Gradient Temperature Control
EJ1G-TC2B-QNH
Name: Basic Unit gradient temperature co
OMRON
Modular Temperature Controller
EJ1N-TC2A-QNHB
Name: Basic Unit temperature control