Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No . of axes: 16 axes.
No. of unit numbers allocated: 1 E2GA-M18KN08-WS-UA1-Z 2M.
Current consumption : 5V, 0.46A; 24V,-- E2GA-M18KN08-WS-UA1-Z 2M
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control E2GA-M18KN08-WS-UA1-Z 2M.
A wide range of position control,
functions are available with,
this position control unit . Appearance: 40-dia. head Push-lock Turn-reset without Voltage Reduction Unit A22E.
Operating: Contact configuration, 1NC; Lighting, LED; Rated voltage, 12 VAC/VDC.
Push-lock turn-reset system.
Color of cap: Red.
Install in 22-dia. or 25-dia. Panel Cutout.
Direct opening mechanism to open the circuit when the contact welds E2GA-M18KN08-WS-UA1-Z 2M.
Safety lock mechanism prevents operating errors .
Easy mounting and removal of Switch Blocks using a lever.
Mount three Switch Units in series to improve wiring efficiency,
(with non-lighted Switch Units, three Units can be mounted for,
multiple contacts).
Finger protection mechanism on Switch Unit provided as a,
standard feature.
Install using either round, or forked crimp terminals.
Oil-resistant to IP65 (non-lighted models)/IP65 (lighted models),
A lock plate is provided as a standard feature to ensure that the,
control box and switch are not easily separated. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are avvailable E2GA-M18KN08-WS-UA1-Z 2M.
HHigh-speed response frequency stably detects moving,
objects: 5 kHz max .
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wwire,
breakage is available (M4, M5 only) E2GA-M18KN08-WS-UA1-Z 2M.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
E2GA-M18KN08-WS-UA1-Z 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2GA-M18KN08-WS-UA1-Z 2M&select=5