Mounting type: W-bracket(see note).
Contact form: 3PST-NO/SPST-NC.
Quick-connect terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage D4N-2A25.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and between the coil and contacts D4N-2A25
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Operation indicator: With operating indication; Standard load.
Ratings: 5 A at 125 VAC D4N-2A25.
Actuator: Roller lever .
Cable length : 3m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material D4N-2A25.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.) Unit: Terminal block model.
I/O classification: Digital output.
Internal I/O common: PNP (+ commoon) D4N-2A25.
I/O points: 16.
I/O cconnections: M3 terminal board .
Power supplyvoltage: 24 VDC.
I/O specification: 0.5 A, DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The ciirccuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires D4N-2A25.
DIN track mounting.
D4N-2A25 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4N-2A25&select=5