Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection E2E-X14MD1-R-Z 5M.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material E2E-X14MD1-R-Z 5M
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables E2E-X14MD1-R-Z 5M.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Name: electrode with 5P.
The installation and disassembly are very simple and can be used in deep wells E2E-X14MD1-R-Z 5M.
The electrode is a stainless steel wire with a layer of vinyl chloride, and the electrode is not in contact with the electrode .
Can also be used in space such as sink and ceiling.
Easy accumulation of deep well pump sewage, the scale can be used PH-1;
In the distance from the depth of the water use, can choose PH-2. Control power supply voltage: 125 VDC.
Input: DC or AC (selectable); input voltage range: 10 to 300 V: Operating mode,
ON-delay; OFF-delay; Startup lock.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using currennt converter E2E-X14MD1-R-Z 5M.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verrsee current detection E2E-X14MD1-R-Z 5M.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@).
E2E-X14MD1-R-Z 5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2E-X14MD1-R-Z 5M&select=5