Needle number: 40.
Specification: loose wire connector, 5 sets (0.3mm 2). Motor series: low inertia, medium capacity.
Rated output power: 6.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MR-JRPCATCBL3M
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Output points: 16 points.
Output type: leakage type MR-JRPCATCBL3M.
Rated output voltage: DC12 ~ 24V .
Max load current: 0.5A/1 point.
Protection function: have.
Common way: 16 point / public end.
Input / output occupied points: 16 points (I/O distribution: output 16 points).
External wiring connection: 18 point terminal.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called MR-JRPCATCBL3M.
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch .
Communication protocol is a standard Modbus protocol or custom protocol. 8 point analog potentiometer function expansion board.Max input / output points: 32 points.
Supply voltage: 100 - 240VAC.
Input points: 16 points.
Output points: 16 points.
Output type: relay.
Power consumption: 40VA.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via moodem communications
Paassword protection, using a eight digit password to protect your program MR-JRPCATCBL3M.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application off tthe continuous scan time MR-JRPCATCBL3M.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
MR-JRPCATCBL3M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-JRPCATCBL3M&select=5