The type of the drive lever: one way action roller rocker type (horizontal action).
Conduit size: single catheter type, M20.
Built in switch structure: slow motion (1NC/1NO).
Safety limit switch in accordance with global standard EN 50047.
The contact constitutes a complete variety, there is a single point of specification (1NC) and double contact specifications (1NC/1NO, 2NC) 70174-1159 SSSE20(LC).
Forced open action structure 70174-1159 SSSE20(LC)
The slow moving contact structure is adopted to ensure that the contact distance is 4mm.
Elevator and escalator can be used. Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width) 70174-1159 SSSE20(LC).
configuration Output: Dark-ON .
Indicator mode: No incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Appearance: Square/Projection type LED voltage-reduction lighting,
(with Voltage Reduction Unit) A22L-C 70174-1159 SSSE20(LC).
Output: SPST-NO.
Lighting: LED.
Operating voltage: 200 VAC .
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Servo trunk unit.
Product Name: servo relay unit.
Application unit: CJ1M-CPU21/22/23.
Specifications: -.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position coontrol unit 70174-1159 SSSE20(LC).
Seervo driver and control signal of position control unit,
Simple wiring on terminal stage .
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaatiion, screw installation of two methods 70174-1159 SSSE20(LC).
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.

70174-1159 SSSE20(LC) Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=70174-1159 SSSE20(LC)&select=5