Model: CPM2C-32CDT1M-D. CPU Unit: Units with 32 I/O points.
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Actuator: Sealed top plunger.
Indicator: Neon lamp.
Item: Basic.
Pretravel (PT): 1.7 mm max.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches 70174-1011 DSLE11(TD)
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads 70174-1011 DSLE11(TD).
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting .
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Appearance: Standard sound.
w/jumper direction A *2: Intermittent (high-pitched).
w/jumper direction B *2(w/o jumper): Continuous (high-pitched).
Supply voltage: 12 to 24 VDC 70174-1011 DSLE11(TD).
Buzzer Unit Series with Cylindrical.
22-mm × 16-dia . Body.
Lineup includes standard-volume models (80 phons, constant) and,
high-volume models (70 to 95 phons, variable). Intermittent or,
continuous sound can be selected. Appearance: Shielded, 3.8 dia.
Stable sensing area: 0.8 (1.8) mm.
Separate Amplifier Sensor with.
Sensitivity Adjustment.
Compact design with smaller Sensor Head.
Heat-resistance model available for application between.
-10 and 200°C. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily becaause operation time,
is indicated from the start of operation 70174-1011 DSLE11(TD).
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions 70174-1011 DSLE11(TD). Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
70174-1011 DSLE11(TD) Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=70174-1011 DSLE11(TD)&select=5