Type: 3 wire, shielded.
Shape: 3.
Detection range: 0.6mm.
Connection mode: lead type (2m).
Wire specification: PVC (oil resistant).
Action mode NC.
NPN output.
Proximity sensors for preferred world top performance and quality.
Standard type of magnetic metal detection.
Rich variety.
According to the conditions to choose the most suitable models 70061-1085 RPS10.
Anti interference function of different frequency range models 70061-1085 RPS10
Has excellent environmental performance.
Standard wire material for oil resistant PVC.
Test face using cutting oil material.
Standard wire jacket. Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit) 70061-1085 RPS10.
Number of notches: 3 notches .
Resetting method: Automatic.
Output: SPST-NO + SPST-NO.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia 70061-1085 RPS10. ring to install in 25-dia. panel cutouts .
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time vallue can be checked eeasily because operation time,
is indicated from the start of operation 70061-1085 RPS10.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeenccy, basic,
frequency, and load conditions 70061-1085 RPS10. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
70061-1085 RPS10 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=70061-1085 RPS10&select=5