LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMGV-13D3C2E
YASKAWA SGMGV-13D3C2E
Sigma -V series servo motor SGMGV.
Rated output: 11kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake) SGMGV-13D3C2E.
Equipped with a high resolution serial encoder (20 bit) SGMGV-13D3C2E
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C SGMGV-13D3C2E.
Excitation mode: permanent magnet type .
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor SGMGV-13D3C2E.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: support mounting type, straight shaft (no keyway and screw).
Optional parts: with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor type SGMPH (speed: 3000r\/min).
Power: 0.1kw.
Power supply voltage: single phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw key.
Optional parts: no brake oil seal.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products wiith single phase 200V, single phase 1000V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer SGMGV-13D3C2E.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a veeery seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated
SGMGV-13D3C2E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGV-13D3C2E&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-75DDA2C
Yaskawa Rotary servo motor SGMGV-75DDA2C
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-1EA3C2B
Yaskawa Rotary servo motor SGMGV-1EA3C2B
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-1EADA2B
Yaskawa Rotary servo motor SGMGV-1EADA2B
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-1AADC6C
Yaskawa Rotary servo motor SGMGV-1AADC6C
Sigma -V series servo motor SGMGV. Rated