10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.GP4000E series entry-level programmable man-machine interface.
Screen size: 10 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color .
Backlight: LED.
Internal memory: EPROM FLASH 32 MB PFXZC3CF2561.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB PFXZC3CF2561
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen PFXZC3CF2561.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw PFXZC3CF2561.
Sliding type battery cabin, so that more convenient to replace the battery .
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns."Size: 10.4 inches.
Display type: TFT color LCD.
Resolution: 640 x 480 pixels (VGA).
Display color: 256 color (no flash) /64 color (3 speed flicker).
Power supply: DC24V.
Interface: USB (TYPE-A), RS-232C, RS-422/485 (MPI).
Brightness adjustment: 8 level adjustment can be carried out by touch panel.
Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.
A comparison of the data is helpful to find the cause of the fault.
These "sample parts" can be used directly, and the design time is greatly reduced.
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized mode of operation, can be recorded when, who performed the operation.
Using this data, you can analyze the causes of all the faults that have occurred.
You can easily and intuitively set the address by dragging and dropping the mouse.
In addition, click on the use of the address can be displayed on the screen number and part number.
Click the part number to jump to the screen using the widget.
The same software supports all 3000 series of Pro-face man-machine interface.
From the screen to create the programming, the functions are simple and easy to use.
Learn a software, master all the skills.
Support efficient image creation.
ID management and operation log reducees downtime PFXZC3CF2561.
Improve thee operation mode, reduce the cost and workload .
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of commpoonents to provide a variety of components, easy to create a beautiful picture PFXZC3CF2561.
In addition, there are a variety of 256 color components can be used. "
PFXZC3CF2561 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=PFXZC3CF2561&select=5