Transmission speed: 156kbps/625kbps/2.5Mbps/5Mbps/10Mbps (automatic tracking).
Station No.: 1~64 station.
External connection mode: 2 pieces of spring clip terminal.
Spring clip terminal.
The safety controller can communicate with the master station of the CCLINK system.
The data from the security controller to the master station can be edited by the parameters MR-JECNP1-02.
The security controller receives the data from the master station to set the tag name MR-JECNP1-02
Transmission speed according to the automatic tracking station, do not need to set the transmission speed.
By using the spring clamping terminal, the wiring time and the maintenance time of the CC-Link cable can be reduced MR-JECNP1-02.
No need to re write parameters after replacement of the module .
The security controller can be set up and connected with the monitoring software.
Confirm the error record that is detected. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.4kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: single phase AC200V MR-JECNP1-02.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller .
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication.
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communicationns to start, stop and moonitoring and other operations MR-JECNP1-02.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.

Thhe servo amplifier can be used for speed control operation MR-JECNP1-02.
When the two stations are occupied, the speed can be set directly by the remote register.
MR-JECNP1-02 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-JECNP1-02&select=5