Connector for connecting DC power cord. (right angle, 5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) . GP4000E series entry-level programmable man-machine interface GP2300-TC41-24V.
Screen size: 10 inch widescreen GP2300-TC41-24V
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V GP2300-TC41-24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc . .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC GP2300-TC41-24V.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC .
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.Controller DIO (NPN model):6 point type NPN input, 2 point NPN type output, connector: 12 pin.
Specification: DC24/C (control) level models.
Display type: TFT color LCD.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
Display color: 65536 color (no flicker) /16384 color (flashing).
Brightness adjustment: cold cathode lamp (backlight lamp replacement: return to repair).
Touch panel type: resistance type (analog).
Remote operation and monitoring in the Office
In the office or other remote side can monitor the production site of the GP screen.
Without picture editing or programming, you can achieve real-time management and monitoring, and now, you can also provide more efficient remote maintenance control.
Rich sample images can reduce programming time.
Pro-face provides a large number of sample images and 3D parts,
So you can easily create a beautiful and intuitive picture, in order to save editing time.
Easily upgrade.
GP/ST series supports GP series of all models of the screen data, including the first generation of the GP10 series.
GP product family to maintain the size of the opening of the panel compatibility, to facilitate easy replacement.
No need to open the control panel, through the PLC to monitor the GP program.
Through the data through the GP function, you can easily debug the ladder program and adjust the data due to changes in the production line by GP easily.
Error visualization.
The controller is directly connected to the GP, and the key error information of the controller can be displayed on the GP by using the sample unit.
Simulated running status on PC.
Use PC simulation function, do not need to transfer the picture to GP,
You can check all the functions of GP on the PC - including the screen operation, D script, logical script.
Providing operation and maintenance instructions through video mode, which can save maintenance cost.
The operation and maintenance instructions provided by the video mode can make any operator easy to master the operation method.
Data transmission using USB memory.
In the production site using USB memory can be easily transferred to the production line change and change the screen data.
Can improve the efficienccy of the 5 functionss GP2300-TC41-24V.
Using EX GP-Pro can easily create a clear picture and save the creation time.
Screen and logic programming software EX GP-Pro interface is very friendly,
The drag and drop feature makes the software interface easy to operate.
EX GP-Pro powerful feeatures, such as 3D simulation components, image fonts and simulation functions,
Even beginners can easily and quickly grasp how to create a picture GP2300-TC41-24V.
GP2300-TC41-24V Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=GP2300-TC41-24V&select=5