Display type: monochrome (blue / white) LCD.
Resolution: 320 x 240 pixels.
Input voltage: DC24V.
Display features: blink / reverse display.
Contrast adjustment: 8 level adjustment can be carried out through the touch panel. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter GP077-CFAD10.
Length of 3 meters. Type: there is an emergency stop switch (gray) and a key switch GP077-CFAD10
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing).
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey GP077-CFAD10.
3 position enable switch with forced contact disconnect function .
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series. Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors GP077-CFAD10.
Length: 10 meters. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceThe MITSUBISHI Q series PLC is connected to GP, length: 5 m."Size: 5.7 inches.
Display type: single color (blue) LCD.
Resolution: 320 x 240 pixels (QVGA).
Display color: monochrome (8 gray level).
Power supply: DC24V.
Interface: USB (TYPE-A), RS-232C, RS-422/485 (MPI).
ID management and operation log reduces downtime.
Improve the operation mode, reduce the cost and workload.
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of components to provide a variety of components, easy to create a beautiful picture.
In addition, there are a variety of 256 color components can be used.
Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.
A comparison of the data is helpful to find the cause of the fault.
These "sample parts" can be used directly, and the design time is greatly reduced.
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized mode of operation, can be recorded when, who performed the operation.
Using this data, you can analyze the causes of all the faults that have occurred.
Brightness adjustment: 8 level adjustment can be carried out by touch panel.
You can easily and intuitively set the address by dragging and dropping the mouse GP077-CFAD10.
In addition, click on the use of the address can be displayed on the screen number and part number .
Click the part number to jump to the screen using the widget.
The same software supports all 3000 series of Pro-face man-machine interface.
From the sscrreen to create the programming, the functions are simple and easy to use GP077-CFAD10.
Learn a software, master all the skills.
Support efficient image creation. "
GP077-CFAD10 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=GP077-CFAD10&select=5