LK Automation Limited
FP-DV01-50
- Brand: Proface
- Country: JAPAN
- Name: DVI-D cable DVI-D output interface
- Model: FP-DV01-50
- Price: 0 >
Proface FP-DV01-50
A1/A2/B+ DIO Type connector (compression type) (5 / set)Input points: 8 points (NPN/PNP type).
External connection: 10 pin terminal connector.
Rated voltage: DC24V.
Rated input current: 7.3mA/DC24V. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Analog /PNP output type FP-DV01-50.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA) FP-DV01-50
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points.
Built in AIO input: 4 points.
Built in AIO output: 2 points FP-DV01-50.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input .
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design FP-DV01-50.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is oonly required to open a hoole in the panel 22mm FP-DV01-50.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the disspllay module is installed in other locations FP-DV01-50.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
FP-DV01-50 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FP-DV01-50&select=5
External connection: 10 pin terminal connector.
Rated voltage: DC24V.
Rated input current: 7.3mA/DC24V. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Analog /PNP output type FP-DV01-50.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA) FP-DV01-50
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points.
Built in AIO input: 4 points.
Built in AIO output: 2 points FP-DV01-50.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input .
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design FP-DV01-50.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is oonly required to open a hoole in the panel 22mm FP-DV01-50.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the disspllay module is installed in other locations FP-DV01-50.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
FP-DV01-50 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FP-DV01-50&select=5
...more relevant model market price >>>>
Related products
Proface
DVI-D cable (10 m)
FP-DV01-100
1-0 DVI standard DVI-D 24 pin convex co
Proface
DVI-D cable DVI-D output interface
FP-DV01-50
Cale for transmitting an image signal f