Cable length: 10m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11. Power: 400kw.
Voltage: 400V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function FA-TH16YRA20SL. Input: 2 channels.
500/200/100/10kpps.
Counter input signal: DC5/12/24V FA-TH16YRA20SL
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
DC12/24V.
0.5A/ point.
2A common end.
40 pin connector. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.75kw.
Interface type: SSCNET type III fiber communication FA-TH16YRA20SL.
Special specification: suitable for direct drive servo motor .
Power specification: single phase AC200V.
Direct drive system suitable for high speed and high precision!
High speed operation can be realized by direct drive (2m/s), and the traditional mechanical transmission can not achieve such a high speed.
The full closed loop control can be realized by using the position feedback signal from the load side encoder, such as the linear encoder FA-TH16YRA20SL.
The use of a flexible linear servo motor drive components can make the system more compact structure.
The primary side of the linear servo motor (motor coil) is sliding along the secondary side (permanent magnet) of the motor,
So linear servo motor is especially suitable for large range of applications. In addition, linear servo motor can be connected in series,
Especially for large systems in two axes for high precision synchronous operation. Input: 4 channels.
Platinum resistance (Pt100; JPt100).
No heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal station.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost.
Heating function at the same time.
The multiple loop can reach the set value at the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs.
Automatic adjustment function.
The PID constant can be adjusted automatically in the control process.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module.
Equipment for high temperature controll stability of extrusiion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling FA-TH16YRA20SL.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling contrroll (heating and cooling) mode FA-TH16YRA20SL.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected.
FA-TH16YRA20SL Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FA-TH16YRA20SL&select=5