Suitable for GLC2300 series"Compact type, RS-422/485 type, white / Pink / red three color LED backlight.
Input voltage: DC24V.
Screen size: 3.4 inches.
Display type (resolution):STN monochrome LCD (200 x 80 pixels).
Touch panel type: analog resistance.
Memory: 2.2MB (internal memory).
Ethernet interface: No .
Serial port: RS-422/485.
SD card slot (max 32GB): No APL3600-KA-CD2G-4P-1G-XM250.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1 APL3600-KA-CD2G-4P-1G-XM250
Replaceable battery: no (rechargeable battery).
Alarm analysis function block: No.
Coating models: none.
The use of drag and drop operations, can be easily shared between the man-machine interface and the control program of the symbolic register data,
Make the programming process intuitive and efficient APL3600-KA-CD2G-4P-1G-XM250.
In addition, the common and special control function is defined as the function block, which simplifies the design of the control system.
The man-machine interface picture is directly connected with the control program, which can realize the efficient programming.
6 Display Module 2 host module, can realize the 12 kinds of "intelligent platform" APL3600-KA-CD2G-4P-1G-XM250.
Modular design, display module and the host module can be split,
Therefore can be replaced respectively .
Display module and host module free combination, function and size of flexible. "With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)PNP output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD: monochrome.
Color: 16 levels of gray.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: No.
USB (host):1.
USB (device): none.
Built in DIO input: 16 points.
Built in DIO output: 16 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input, pulse output, PWM output.
Special DIO: No.
Expansion module EX module: up to 3.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
In order to meet the needs of users for small control devices, Pro-face integrated control and operation functions in the human computer interface.
In short, is to indicate the lights, instruments and other display devices and switches, buttons and other operational functions to integrate into a compact PLC.
In addition to reducing wiring and saving space, the design also greatly reduces the use of electrical components,
Which ensures the long service life of the equipment.
The compact models are equipped with standard I/O, and they can be used as a special I/O.
High / low pulse with maximum 100kHz and maximum 65kHz of the high speed counter can be achieved by the advanced control.
Strong I/O interface not only supports the need to switch and indicator light equipment, but also supports the need for sophisticated positioning of complex equipment.
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Use EX GP-Pro to easily test and debug the project.
EX GP-Pro simulation is a kind of offline simulation function, with the help of this function,
No need to connect the man-machine interface, you can test the operation of the screen and the logic program.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Using remote monitoring software GP-Viewer or data acquisition software EX Pro-Server,
Can easily monitor the production scene of the man-machine interface screen, or release production orders and real-time data collection.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Connect various control devices.
Pro-face human machine interface can be connected to a variety oof industtrial controllers, including PLC, motion controller, robot and other equipment APL3600-KA-CD2G-4P-1G-XM250.
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operattioonal performance APL3600-KA-CD2G-4P-1G-XM250.
Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running.
APL3600-KA-CD2G-4P-1G-XM250 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=APL3600-KA-CD2G-4P-1G-XM250&select=5