For RGB input USB cable to prevent disconnection (2 / set)A1/A2/B+ DIO Type connector (welding type) (5 / set)For multi connection communication, length: 5 meters.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Type: there is an emergency stop switch (red) and a key switch .
Display type: TFT color LCD AGP3310-T1-D24.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing) AGP3310-T1-D24
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey.
3 position enable switch with forced contact disconnect function AGP3310-T1-D24.
Key switch without pressing the emergency stop switch can also be mobile devices .
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series.LT4000M (module type DIO), PNP output, DC24V (host).DIO model /NPN output type.
Display size: 3.5 inches.
Resolution: 320 x 240 pixels (QVGA) AGP3310-T1-D24.
LCD:TFT.
Color: 65536 color .
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 20 points.
Built in DIO output: 10 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Connect various control devices.
Pro-face human machine interface can be connected to a variety of industrial controllers, including PLC, motion controller, robot and other equipment.
Remote HMI Pro-face.
Natural connection production line and tablet PC or smart phone. By adding APP,
True implementation of mobile operations without loss of any operational performance.

Directly confirm the cause of the failure of the phone, as far as possible not to the scene on the recovery of the machine running AGP3310-T1-D24.
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy tto use system design AGP3310-T1-D24.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
AGP3310-T1-D24 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=AGP3310-T1-D24&select=5