No. of notches: 3 notches.
Output: DPDT.
Reset method: Manual.
Lighting method: Non-lighted.
Separate Construction with Cylindrical.
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads .
Oil-resistant IP65 models,
Conforms to EN60947-5-1 D4N-1B2H. Ratings: 1 A at 30 VDC.
LED indicator: With indicator D4N-1B2H
Actuator: Center roller lever.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement D4N-1B2H.
Triple-seal construction to provide IEC IP67 degree of protection .
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A).
Operation: Alternate operation (Self-holding).
Case color: Light gray D4N-1B2H.
Output: DPDT.
Lighting: LED; 24 VDC .
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting).
included in lineup. E3JK-DS30M2 detection method: diffuse reflection type,
Connection mode: lead wire,
Detection range: 300mm.
Output status: shading ON.
Output: relay,
2 types of cost reductionAppearance: T-shaped, slot center 10 mm.
Sensing method: F-shaped.
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Serries includes models that ennable switching between,
dark-ON and light-ON operation D4N-1B2H.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for daarkk-ON,
operation are also available D4N-1B2H.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature.
D4N-1B2H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4N-1B2H&select=5