Optical system: Diffuse reflective.
Beam shape: Spot beam.
Sensing distance: 40±10 mm.
Resolution: 2 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; G1/2 .
Built-in switch mechanism: 1NC/1NO MBB(Slow-action) A22L-CY-24A-02M.
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards A22L-CY-24A-02M
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement A22L-CY-24A-02M.
Standardized gold-clad contacts provide high contact reliability .
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Input/Output: Inputs.
Internal I/O circuit common: NPN (+ common).
I/O points: 8 points.
I/O connection method: Sensor connector A22L-CY-24A-02M.
Rated voltage for I/O power supply: 24 VDC.
Eight Waterproof Terminal Models .
Emphasizing Cost Efficiency.
Reduced Labor.
Connection using connectors reduces the lead time,
required for installation. No tools are required for,
connection to a variety of devices.
Reduced Wiring.
Signal line wiring has been reduced so that the,
Terminal can be mounted closer to sensors and,
other devices.
Relay Box not Required.
Environment-resistant, dust-tight, drip-proof,
construction (IP67) enables direct on-site,
mounting.
Easier Maintenance.
Significant reductions not only in setup time but also,
maintenance time.
Reduced Space, Improved Operability,
Compact design (160 x 54 mm (W x H)) (8-point models).
Settings and connections can be performed using,
the switch and connectors on the front side of the Terminal.
System Configuration. Ontology: terminal type, analog input type.
Category: control output 2 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output 1: current output.
Control output 2: voltage output (SSR driver).
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
A power supply for the detection of /ES1B fault, SSR fault and heater over current for heater use.
Event input points: -.
Transfer output: output (using control output).
Communication: RS-485.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventtive maintenance funcction is increased,
Further performance improvement A22L-CY-24A-02M.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivve display PV/SV A22L-CY-24A-02M.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
A22L-CY-24A-02M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22L-CY-24A-02M&select=5