Socket body.
Representative examples of applicable models.
Timer: H3Y series; H3YN series; H3Y (N) -2-B.
Pole number: 2.
Socket for MY relay, G2R-S relay.
Save hours of Push-InPlus terminal type to add product series.
Using Plus Push-In terminal, compared with the previous screw terminals,
Save wiring time (compared with the previous screw terminals, can shorten the wiring time of about 60%*) MM3P DC100/110.
Screw will not loose, to achieve maintenance free MM3P DC100/110
The insertion force is small, the drawing strength is big, and the wiring time is saved, and the high reliability is simultaneously considered.
When connecting multiple strands, the use of non - holding mechanism,
Insert a word screwdriver to keep it MM3P DC100/110.
2 wires can be inserted in each terminal.
DIN guide rail installation, screw mounting common. Input capacity: 16 points.
Rated current (ON current): 0.5 A/output, 4.0 A/common.
Internal I/O common: PNP.
Residual voltage: 1.2 V max. (0.5 ADC,
between each output terminal and the V terminal).
Leakage current: 0.1 mA max.
ON delay: 0.5 ms max.
OFF delay: 1 MM3P DC100/110. 5 ms max.
Number of circuits per common: 16 points/common .
Output indicators: LED display (yellow).
Isolation method: Photocoupler isolation.
I/O power supply method: Supply by I/O power supply.
Output device supply current: 100 mA/point.
Unit power supply current consumption: 80 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
e-CON Connector insertion durability: 50 times.
Weight: 130 g max.
Expansion functions: No.
Output handling for communications errors:
Select either hold or clear.
Short-circuit protection function: No.
Easy wiring using industry standard,
e-CON connectors.
Special wiring tool is not necessary.
Digital I/O terminal with industry,
standarrd e-CON connectors MM3P DC100/110.

A common terminal is provided for,
each connector .
The I/O terminal and the sensors can,
be connected directly.
Input response time can be switched for,
high-speed processing.
Selectable node address setting methods:
setting with rotary,
swwittch and with tool software MM3P DC100/110.
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance.

MM3P DC100/110 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MM3P DC100/110&select=5