Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units).
Detailed LED indications enable easy diagnosis.
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4) .
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set MKS1TI-10 AC200
-Two logical AND connection inputs. Output: DPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 5 VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white MKS1TI-10 AC200.
Item: Alternate operation (Self-holding) .
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. I/O Interface UnitOutput mode: E3C-LS3R detection mode: qualified reflection type MKS1TI-10 AC200.
Detection distance: 30 positive and negative 3mm .
Purpose: small,
Small thin space probe;
Interference prevention function with close installationE32-D15Y type: standard type; standard,
Specialty: plane shape side,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsE3JK-R4M2 detection method: Regression reflection type with M.S.R. function,
Connection mode: lead wire,
Detection range: 5m.
Output status: shading ON.
Output: relay,
2 types of cost reductionModel: P7S/P7SA, pages 20 and 21, Front-mounting.
Approx: 110 g.
Number of pins: 14 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet MKS1TI-10 AC200.
Wiriing material cost can be reduced .
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee . MKS1TI-10 AC200.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.
MKS1TI-10 AC200 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MKS1TI-10 AC200&select=5