CV500-CN Cable Bus Connecting Cable Used to join two Hard Disk Units CV500-CN116.Optical system: Through-beam.
Measuring width: 1-mm dia.
Sensing distance: 0 to 2000 mm.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website . Category: built-in diode (DC) LY2-0-J AC110/120.
Contact form: 4DPDT.
Structure: insert / solder terminal
LY2-0-J AC110/120
Indicator: with LED indicator light.
Note: when the order is ordered, the number of the models is added with the rated voltage of the coil.
For example: AC6V AC6V, MY2-J on behalf of the rated voltage of the coil.
Upgraded version of the small power relay, there are a variety of models, suitable for a variety of sequential control and power applications LY2-0-J AC110/120. Control power supply voltage: 100/110 VDC.
Input: DC or AC (selectable), Input voltage range, 0.2 to 12 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL) LY2-0-J AC110/120.
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@). Actuator: Plunger.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO,, 2NC, 2NC/1NO and,,
3NC contact forms LY2-0-J AC110/120.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used witth both standard loads and microloads LY2-0-J AC110/120.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC.
LY2-0-J AC110/120 Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=LY2-0-J AC110/120&select=5