Thermocouple type: K (CA).
Heat resistance: heat resistant.
External: all glass fiber outer foreskin.
Compensating wire length: 1 m.
A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours .
A temperature sensor is used as a thermal sensor for a thermostat K3NR-NB1C-T2.
According to the temperature, place, the surrounding environment to be measured K3NR-NB1C-T2
Products with various shapes, shapes, lengths and terminals.
Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Momentary operation (Self-resetting).
Output: DPDT.
Lighting: Incandescent lamp, 6 VAC/VDC K3NR-NB1C-T2.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton
n @ . R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation.
Easy panel mounting from the front and simple lamp replacement.
without tools. Ratings: Standard load; 0.1 A at 125 VAC, 0 K3NR-NB1C-T2. 1 A at 30 VDC.
Cable: VCTF cable *2 .
Actuator: Crossroller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)No. of cable cores: 4.
Cable connection direction: Straight/Straight K3NR-NB1C-T2.
Cabble length L: 1 m .
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch K3NR-NB1C-T2.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
K3NR-NB1C-T2 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=K3NR-NB1C-T2&select=5