Free change detection direction.
Easy to use small cube type.
Can change the direction of detection according to the position of the front and side (15 degree).
Type: cube detection variable way / DC type connector.
Shape: shield.
Detection distance: 20mm.
Output status: NO+NC PNP (two kinds of output) . Short/disconnection detection: Supported G7L-1A-P AC12.
Specifications: I/O, NPN (input: + common, output: - common), 16 inputs/16 outputs G7L-1A-P AC12
I/O connections: Clamp terminals.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC.
Reduced Wiring and Labor on Factory Sites with Screw-less Terminal Wiring G7L-1A-P AC12.
Screw-less structure eliminates tightening work .
Detachable terminal blocks for easier maintenance.
Single-step wiring by simply inserting pole terminals. Size: M30, Non-shielded.
Sensing distance: 30.0 mm
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 66 (80).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater G7L-1A-P AC12.
Sensing Distance.
Ensures a sensing distance approximately 1 . 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Ratings: 0.1 A.
Actuator: Pin plunger.
Terminals: Solder terminals.
Contact form: SPDT.
Sealed Subminiature Basic.
Switch Conforming to IP67.
(Excluding the terminals on terminal models).
UUse of epoxy resin assuures stable sealing,
making this switch ideal for places subject to,
water spray or excessive dust G7L-1A-P AC12.
Ideal for automobiles, automatic vending,
machines, refrigerators, ice-making equipment,
bath equipment, hot-water supply systems, air,
conditiionners, and industrial equipments, which,
require high environmental resistance G7L-1A-P AC12.
Models available with UL, CSA, and VDE safety,
standard compliance.
G7L-1A-P AC12 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G7L-1A-P AC12&select=5