Input capacity: 16 points.
Rated current (ON current): 0.5 A/output,
4.0 A/common.
Internal I/O common: PNP.
Residual voltage: 1.2 V max.
(0.5 ADC, between each output,
terminal and the V terminal)
Leakage current: 0.1 mA max.
ON delay: 0.5 ms max.
OFF delay: 1.5 ms max.
Number of circuits per common:
8 points/common .
Output indicators: LED display (yellow) XS2F-M12PVC4A7M.
Isolation method: Photocoupler isolation XS2F-M12PVC4A7M
I/O power supply method: Supply by I/O power supply.
Output device supply current: 100 mA/point.
Unit power supply current consumption: 90 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
I/O power supply current consumption: 5 mA max XS2F-M12PVC4A7M.
(for 20.4 to 26.4-VDC power supply voltage)
Weight: 370 g max .
Expansion functions: No.
Output handling for communications errors:
Select either hold or clear.
Short-circuit protection function: No.
A common terminal is provided for each contact.
It eliminate the needs for relay terminal blocks.
It is unnecessary to share the common terminal,
among multiple contacts.
Easy-to-find wiring locations XS2F-M12PVC4A7M.
Detachable screw terminal block facilitates the maintenance .
Input response time can be switched for high-speed processing.
Selectable node address setting methods: setting with rotary,
switch and with tool software.
When setting the nodes with rotary switch, setting is easy and,
node identification becomes possible for maintenance. Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0 XS2F-M12PVC4A7M.6 M.
Cable length:: 2m . Specification: medium capacity type.
Impact resistance: 400W.
Resistance to impact resistance: 50.
The use of resistance to consume the motor regenerative energy, thereby reducing the time to slow down.
Alarm output terminal of braking resisttorr XS2F-M12PVC4A7M.
When the temperature relay of the braking resistor is activated, a circuit for cutting the main power supply of the frequency converter is formed.
XS2F-M12PVC4A7M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=XS2F-M12PVC4A7M&select=5