E32-D25X type: standard type; standard,
Specialty: flat shape (small),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type .
Non polar proximity sensor XH3A-0141-2A.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M12 XH3A-0141-2A
Detection range: 8mm.
Action mode: NC. Item: Advanced models; ATC function models.
Functions: ATC (Threshold value automatic correction).
Model: PNP output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
reception at the press of a button XH3A-0141-2A.
APC circuits to suppress LED aging degradation used with,
4-element LEDs .
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. Name: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection XH3A-0141-2A.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Actuator: Roller lever (resin lever, resin roller).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NCC/1NO, 2NC, 2NC/1NO and,,
3NC contact forms XH3A-0141-2A.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used witth both standard loads and microloads XH3A-0141-2A.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC.
XH3A-0141-2A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=XH3A-0141-2A&select=5