Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage .
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase V680S-A41 2M
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions V680S-A41 2M. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type V680S-A41 2M.
Non polar proximity sensor .
Type: DC two-wire / connector type.
Polarity: there.
Shape: shield, M12.
Detection range: 3mm.
Action mode: NO. Name: Bit Slave Units with e-CON Connectors.
Specifications: Outputs; 2 outputs; PNP.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits.
Simple communications connections,
with flat cable and connectors.
Bit-level disttribution to support,
eessentially any application V680S-A41 2M. Appearance: Unshielded.
Sensing surface: Top.
Sensing distance: 2.5 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Ammpllifier V680S-A41 2M.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption.
V680S-A41 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=V680S-A41 2M&select=5