Output: DPDT.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry .
Detachable Switch TL-Q5MC1-R 2M.
The same contacts can be used for both standard loads and microloads TL-Q5MC1-R 2M
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Specifications: Optical ring(GI cable).Application: 410 × 410 mm.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible TL-Q5MC1-R 2M.
Three sizes are available to match various sizes of clean booths. Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage TL-Q5MC1-R 2M.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase .
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Improved update. Reduce standby power consumption, and then achieve lightweight.
Standby power consumption reduced to 85% of the company''s previous products. (61F-GN)
The quality is reduced to less than 85% of the company''s previous products. (61F-G3N, G4N)
With LED action display function, so that the state of aaction at a glance TL-Q5MC1-R 2M.
Byy improving the reliability of internal relays (tiny load 1mA DC5V), the PLC input becomes possible .
The electrode side terminals and other wiring terminals are separated, so the wiring operation is simple.
Installation method can choose the JEM aggreement, DIN guide rail installation, screw installation in 3 ways TL-Q5MC1-R 2M.
Relay unit.
Product Name: 61F-11_ unit * 1.
Purpose: long distance use (2km).
TL-Q5MC1-R 2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=TL-Q5MC1-R 2M&select=5