LK Automation Limited
SS-01GPD
OMRON SS-01GPD
Temperature range: -40.0 ~ 40.
Positive / reverse action: positive action (cooling).
Adjustment mode: OFF, ON action.
With the aid of microcomputer, the temperature control can be realized with high precision (0.1 degrees C).
Combined use of control equipment, adjustable sensitivity.
Attached to facilitate the energy saving operation of the set value conversion function, as well as ease of operation to stop the control function SS-01GPD Cable length L: 0.5 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Direction of Operation Key insertion: Horizontal.
Cable length: 5 m.
2NC/1NO (Slow-action) SS-01GPD.
Slim Safety Door Switches with IP67 Rating .
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection. I/O classification: Temperature inputs SS-01GPD.
I/O points: 4 inputs.
I/O connections: Terminal block .
Power supply voltage: 24 VDC.
Input specification: Thermocouple.
Temperature Input Units for use with MULTIPLE I/O TERMINAL.
Four inputs.
Thermocouples and platinum resistance thermometer models,
are available.
Conversion time is only 250 ms for 4 inputs.
The Configurator can be used to calibrate temperatures.
The circuit section can be removed, so rewiring isn’t,
required during maintenance.
DIN track mounting. Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models SS-01GPD.),
Incorpoorates a switch with a durable coil spring in a tough,
high precision case .
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Termminnal protective cover can be switched to wire cable from,
either the left or right SS-01GPD.
Sealing characteristics that meet IEC IP67 degree of protection.
SS-01GPD Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SS-01GPD&select=5
Positive / reverse action: positive action (cooling).
Adjustment mode: OFF, ON action.
With the aid of microcomputer, the temperature control can be realized with high precision (0.1 degrees C).
Combined use of control equipment, adjustable sensitivity.
Attached to facilitate the energy saving operation of the set value conversion function, as well as ease of operation to stop the control function SS-01GPD Cable length L: 0.5 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Direction of Operation Key insertion: Horizontal.
Cable length: 5 m.
2NC/1NO (Slow-action) SS-01GPD.
Slim Safety Door Switches with IP67 Rating .
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection. I/O classification: Temperature inputs SS-01GPD.
I/O points: 4 inputs.
I/O connections: Terminal block .
Power supply voltage: 24 VDC.
Input specification: Thermocouple.
Temperature Input Units for use with MULTIPLE I/O TERMINAL.
Four inputs.
Thermocouples and platinum resistance thermometer models,
are available.
Conversion time is only 250 ms for 4 inputs.
The Configurator can be used to calibrate temperatures.
The circuit section can be removed, so rewiring isn’t,
required during maintenance.
DIN track mounting. Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models SS-01GPD.),
Incorpoorates a switch with a durable coil spring in a tough,
high precision case .
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Termminnal protective cover can be switched to wire cable from,
either the left or right SS-01GPD.
Sealing characteristics that meet IEC IP67 degree of protection.
SS-01GPD Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SS-01GPD&select=5
...more relevant model market price >>>>