Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 27 (43).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor SGE-245-5-2500 01000C-02000F.
Problems such as the collision of workpieces are eliminated SGE-245-5-2500 01000C-02000F
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: 48 x 24mm.
Control output 1: voltage output (SSR driver).
Control output 2:-- SGE-245-5-2500 01000C-02000F.
Auxiliary output: 2 points.
Power supply voltage: AC/DC24V.
Terminal type: PUSH-IN fastening terminal table type .
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: 1 points.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc SGE-245-5-2500 01000C-02000F. .
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition.
The terminal stage is adopted to disassemble and assemble the structure, which improves the maintenance performance.
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication conversion Village (sold separately) connected to the computer after,
No power connection can be set.
It can be easily set by CS-Thermo (sold separately). Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torqque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified SGE-245-5-2500 01000C-02000F.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for moonitoring the operation trend SGE-245-5-2500 01000C-02000F.
External event input can be applied to a variety of measurement and identification situations.
Can enter DC0.001mV to
SGE-245-5-2500 01000C-02000F Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-5-2500 01000C-02000F&select=5