No. of digits: 3.
Display color: Red.
Input method: Static.
Logic: Negative.
Display contents: Numerals and minus symbol.
A Series of Three- to Five-digit Digital.
Display Units with a Character Height of,
14 mm. Models available with either red or,
green displays.
Red or green displays with a character height of 14 mm are,
available for a variety of applications and locations SGE-245-0-3350 05000C-01000C.
Miniature design with a 50-mm depth SGE-245-0-3350 05000C-01000C
Incorporating a connector, thus saving wiring effort.
Connecting to OMRON''s PLCs via dedicated PLC cables (sold separately).
Units and minus symbols are displayed (three- and four-digit model only) SGE-245-0-3350 05000C-01000C.
Incorporating a zero suppression function.
The power supply can freely change between 12 and 24 VDC .
CE Marking. UL certification approval. Type: 1a1b welding terminal.
Shape: square.
Type: small load.
Action: instantaneous action (auto recovery).
With light: LED with light.
Using voltage: DC24V.
Operation Department color: green.
20mm long, with 12 round series
High brightness all one side light SGE-245-0-3350 05000C-01000C.
Because it is round, so easy to punch.
Miniaturization, operation feel good . Appearance: Shielded, M30.
Sensing distance: 12 mm.
Output configuration: DC 2-wire (polarity).
Operation mode: NC.
Proximity Sensor Ideal for the Food and Beverage Industry. E3Z-L61-S0SRW-E3 fine beam
Reflective typeName: Slice I/O Units; Digital I/O Units.
Specifications: 4 inputs PNP.
Standards: CE, UC1, L, N.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Actuator: Roller lever (stainless steel roller).
Conduit openings: M20.
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indiicator pplate and the lever SGE-245-0-3350 05000C-01000C.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NNEMMA 3, 4, 4X, 6P, and 13) SGE-245-0-3350 05000C-01000C.
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.

SGE-245-0-3350 05000C-01000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-0-3350 05000C-01000C&select=5