Ratings: 1 A at 125 VAC.
LED indicator: With indicator.
Actuator: Crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement .
Triple-seal construction to provide IEC IP67 degree of protection SGE-245-0-1200 03000C-00100C.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) SGE-245-0-1200 03000C-00100C
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) C200H CPU 100/200-240VAC C200H-CPU02-E.Release Key Type: Standard (metal) SGE-245-0-1200 03000C-00100C.
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (without indicator) .
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 4-contact Model,
Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank @.
Conduit size (See Note.): G1/2.
World''s smallest Class 6-contact Guard Lock SGE-245-0-1200 03000C-00100C.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors. Ontology: terminal type, analog input type.
Type: control output 1 point type (power AC/DC24V).
Shell color: black.
Control output: relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater with broken wire, SSR fault, heater over current detection function /ES1B power supply: single phase heater with detection function.
Event entry point: 2.
Transfer output: -.
Communication: -.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventive maintenannce funcction is increased,
Further performance improvement SGE-245-0-1200 03000C-00100C.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivve display PV/SV SGE-245-0-1200 03000C-00100C.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
SGE-245-0-1200 03000C-00100C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-0-1200 03000C-00100C&select=5