Type: square.
Screen mode: no segmentation.
Output: DPDT.
Power supply voltage: DC24V.
Contact type: standard load (AC250V, 3A; DC30V, 3A).
Operation: alternating action (self retaining).
Operation Department color: Blue (using yellow and green LED).
In the touch and the ability to protect than OMRON''s previous models have improved SGE-225-0-2780 05000C-05000C.
The micro volume design of 23mm is realized.
Micro design and unique combination of soft sensing SGE-225-0-2780 05000C-05000C
LED has five colors (red, yellow, green, white, and blue).
Built in basic switch improves touch.
Built in basic switches in the previous model based on the OMRON to improve the protection SGE-225-0-2780 05000C-05000C.
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient . No. of notches: 2 notches.
Output: SPDT.
Reset method: Automatic.
Lighting method: Non-lighted.
Separate Construction with Cylindrical.
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads SGE-225-0-2780 05000C-05000C.
Oil-resistant IP65 models,
Conforms to EN60947-5-1 . The Terminal Covers can be attached to Z, A, X, and DZ Switches.
The Terminal Cover is secured with mounting screws and protects the casing and, terminal wires.
from dust, vibration, or fingers, thus preventing terminal short-circuiting,
ground faults, wire.
disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections.
These sections can be.
torn open for providing holes for lead cables at desired points.
A terminal cover can’t be used in the case of using an actuator sold separately. Ratings: 0.1 A at 125 VAC.
Cable: VCTF oil-resistant cable*.
Actuator: Sealed roller plunger.
Cable length : 5m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encaapsulatiing material SGE-225-0-2780 05000C-05000C.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfiirmation of operation SGE-225-0-2780 05000C-05000C.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
SGE-225-0-2780 05000C-05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-0-2780 05000C-05000C&select=5