Sensing method: Retro reflective wit MSR functio.
Connection method: Connector (M8, 4 pins).
Sensing distance: 4 m (100 mm )(Using E39-R1S).
Model: NPN output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow .
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits SGE-125-2-2540 05000C.
Certified by Ecolab Europe SGE-125-2-2540 05000C Appearance: Round/Half-guard type A22-H.
Output: SPST-NO + SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia SGE-125-2-2540 05000C. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit .
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals SGE-125-2-2540 05000C.
IP65 oil resistance (non-lighted models).
IP65 (lighted models) . Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily becaause operation time,
is indicated from the start of operation SGE-125-2-2540 05000C.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions SGE-125-2-2540 05000C. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
SGE-125-2-2540 05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-125-2-2540 05000C&select=5