Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 1NC/1NO (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms .
(Slow-action models with MBB contacts are available SC-22. )
M12-connector models are also available, saving on labor and,
simplifying replacement SC-22
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC SC-22. Sensing method: Through beam .
Connection method (cable length): Pre-wired connector (0.3 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: NPN open collector.
Compact Body, High-visibility.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm SC-22.
Low-profile Sensor with thickness of 8 mm and enlargeable,
work opening .
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring. Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Terminal (wire connection): Screw terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC 100V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals SC-22.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also sttocked to meet the screw type needs SC-22.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.
SC-22 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SC-22&select=5