Classification: Micro load.
Contact gap: H (0.25 mm).
Actuator: Pin plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types S82S-7724 DC 24V0.3A.
A series of standard models for micro loads is available S82S-7724 DC 24V0.3A
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Classification: Momentary operation.
Shape of Operation Unit: 40 dia.
Output: 2.
Operation Unit color: Yellow (-Y).
Long Service Life with Built-in Z-series S82S-7724 DC 24V0.3A.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads .
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton construction enables use in locations subject to,
splashing water and oil and scattering dust.
Pushbuttons are available in three shapes and six colors. CVM1-CL Accessory MODULE, CONTROLLER LINK, 62 S82S-7724 DC 24V0.3A. 5FIB CVM1-CLK52.Actuator: Plunger.
Conduit size: 2-conduit; G1/2 .
Built-in switch mechanism: 1NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Inverter input power: 3 phase / single phase AC200V.
Weight: 7.0KG.
Standard applicable line diameter: 38 square mm or more.
Used to suppress harmonic currents generated by a transducer.
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor. Size: 48 x 24mm.
Control output 1: linear current output.
Control output 2:--.
Auxiliary output: 2 points.
Power supply voltage: AC/DC24V.
Terminal type: PUSH-IN fastening terminal table type.
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: RS-485.
Event input: -.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc..
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition.
The terminal stage is adopted to disassemble and assemble the structure, which improves the mmaintenance perfformance S82S-7724 DC 24V0.3A.
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication converrsiion Village (sold separately) connected to the computer after,
No power connection can be set S82S-7724 DC 24V0.3A.
It can be easily set by CS-Thermo (sold separately).
S82S-7724 DC 24V0.3A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=S82S-7724 DC 24V0.3A&select=5