LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMVV-2BDDDL1
YASKAWA SGMVV-2BDDDL1
Servo motor SGMDH type.
Rated speed: 3000r\/min.
Power: 4.0kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: with oil seal, D24V brake.
Partial flat series: the need to install the servo motor in a small space .
Rich motor series SGMVV-2BDDDL1.
Equipped with brake, belt reducer, such as a wealth of motor products SGMVV-2BDDDL1
Online automatic adjustment, automatic measurement of mechanical properties, set the required servo gain.
Even if the initial contact, can also be completed in a short time the best set.
Automatic identification of the motor, servo drive automatic identification of servo motor power, specifications, automatic setting motor parameters SGMVV-2BDDDL1.
Standard for regenerative resistance connection terminals.
Connecting terminal equipped with external regenerative resistance,
Convenient connection regenerative resistorLarge capacity SGMVV type servo motor.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 800r\/min SGMVV-2BDDDL1.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw) .
Optional parts: with hold brake (DC24V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMGV.
Rated output: 7.5kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: no matching.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.

Installation method: fflange type SGMVV-2BDDDL1.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) SGMVV-2BDDDL1.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMVV-2BDDDL1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMVV-2BDDDL1&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Large capacity servo motor
SGMVV-3ZD3BL1
Yaskawa Large capacity servo motor SGMVV-3ZD3BL1
Large capacity SGMVV type servo motor. R
Yaskawa
Large capacity servo motor
SGMVV-3ZADDKC
Yaskawa Large capacity servo motor SGMVV-3ZADDKC
Large capacity SGMVV type servo motor. R
Yaskawa
Large capacity servo motor
SGMVV-3ZD3DLS
Yaskawa Large capacity servo motor SGMVV-3ZD3DLS
Large capacity SGMVV type servo motor. R
Yaskawa
Large capacity servo motor
SGMVV-2BD3DKF
Yaskawa Large capacity servo motor SGMVV-2BD3DKF
Large capacity SGMVV type servo motor. R