LK Automation Limited LK Automation Limited
Brand Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Home >> Price
SGMSH-50ACA6D
YASKAWA SGMSH-50ACA6D
Servo motor type SGMAH (speed: 3000r\/min).
Power: 30W.
Power supply voltage: single phase AC200V.
Serial encoder: 16 bit absolute value.
Design sequence: A.
Shaft end: straight shaft with screw.
Optional parts: with oil seal.
Improve mechanical properties.
In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,
Compared with the original models, CPU computing time for its 1\/2, through the expansion of the new control algorithm,
Positioning time is shortened to the original product of 1\/3, to achieve a good response SGMSH-50ACA6D
The parameter setting and maintenance time is shortened SGMSH-50ACA6D.
In order to establish a high degree system in a short time, the use of the simplicity of the .
Flexible use of online automatic adjustment function,
Automatic adjustment of servo system with mechanical characteristics.
Then use the main loop \/ control circuit power separation and alarm tracking memory function, can be simple to carry out maintenanceLarge capacity SGMVV type servo motor.
Rated output: 45KW SGMSH-50ACA6D.
Voltage: three phase AC400V .
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (with keyway and screw).
Optional parts: keep the brake (DC90V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMGV.
Rated output: 1.8kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC90V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.

Installation method: fflange type SGMSH-50ACA6D.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% ((not dew) SGMSH-50ACA6D.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMSH-50ACA6D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMSH-50ACA6D&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Super high power motor
SGMSH-40ACA2E
Yaskawa Super high power motor SGMSH-40ACA2E
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15ACA21
Yaskawa Super high power motor SGMSH-15ACA21
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15A2A2C
Yaskawa Super high power motor SGMSH-15A2A2C
Servo motor SGMSH type. Rated speed: 300
Yaskawa
Super high power motor
SGMSH-15A2A3S
Yaskawa Super high power motor SGMSH-15A2A3S
Servo motor SGMSH type. Rated speed: 300