Model : CVM1D-CPU21.
For duplex system requires two.Specifications: 8 Kwords with clock.C500-RM SYSMAC BUS Remote I/O Master Wired C500-RM201.
Master station unit remote I/O CS1G-CPU43-V1 PDF. Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Unit type: CJ1 Basic I/O Units.
Product name: Transistor Output Units CS1G-CPU43-V1
Specifications: Output type, Sinking;
I/O points, 64 outputs;
Maximum switching capacity, 24VDC, 0.3A;
Commons, 16 points, 1 common;
External connection, MIL connector.
No. of words allocated: 4 words CS1G-CPU43-V1 PDF.
Current consumption: 5V, 0.17A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices CS1G-CPU43-V1 PDF.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput. CV500-VP CPU Bus Unit Personal Computer Unit Main Mem CV500-VP227-E.
8-MB memory; w/floating-point processor.Model : CV500-CN432.
Cable I / O connection.
40M cable length.CQM1-LK Speciaal I/O Unit I/O LINK MODULE SYSBUS CQM1LK501 OMRON INSTRUCTIONS REFERENCE MANUAL CS1G-CPU43-V1 Manual. Ranges : -10 to + 10V, 0 to 10V, 0 to 5V, or 0 to 20mA.
Power supply : Built-in, DC/DC converter.Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units.
Specifications: I/O points, 4 outputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point OMRON INSTRUCTIONS REFERENCE MANUAL.
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.18A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data OMRON INSTRUCTIONS REFERENCE MANUAL.
Analog Output Units for converting ,
binary data into analog output signals. Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 64 inputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, --.
Standards: UC1, CE.
It transmiits 16 points of I/O signals per,
word with a pair of cables CS1G-CPU43-V1 INSTRUCTIONS REFERENCE MANUAL.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal withouut,
any need to worry about communications CS1G-CPU43-V1 Manual.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator.