5 in each package.
Application: to protect the surface of the display, to prevent the operation of oil or other material pollution.
The contaminated part of the adhesive film can be replaced FX2N-32MT-D PDF.
Specifications: 120*92mm.
Application Series: F940GOT, hand held GOT. MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 18.5KW.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%) FX2N-32MT-D PDF FX2N-32MT-D
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and electrical.
The inverter drive can be smoothly start (start time longer) FX2N-32MT-D PDF.
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120% rated torque;
For the inverter with the torque automatic enhancemment function, the starting torque is more than 100%, which can start with full load FX2N-32MT-D Manual. Application: you can transfer the same image data at a high speed (about two seconds per 64KB data) to multiple F940GOT MITSUBISHI PROGRAMMING MANUAL II.
When programming software is used in the case of Designer2 GT,
You can create a file in HEX Intel format.
Using communication software to transfer data to a ROM writer.
Application Series: F940GOT. For the operation panel (FR-DU08) between the connector and the connecting cable MITSUBISHI PROGRAMMING MANUAL II. Memory format: EEPROM.
Number of steps: up to 16000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device. "MITSUBISHI inverter FR-F740 series MITSUBISHI PROGRAMMING MANUAL II.
Voltage level: three phase 400V.
Frequency converter capacity: 7.5KW.
The use of frequency converter motor is in order to speed, and reduce the starting current.
In order to produce a variable voltage and frequency, the device is the first power of the AC power conversion to DC (DC), the process is called rectification FX2N-32MT-D PROGRAMMING MANUAL II.
The direct current (DC) is transformed into alternating current (AC) and its scientific term is "inverter" (inverter).
General inverter is the DC power supply inverter for a certain fixeed frequency and a certain voltage of the inverter FX2N-32MT-D Manual.
For the inverter as the frequency adjustable, adjustable voltage inverter, we called the inverter. "